1156 BA15S P21W LED Bulbs 6000K White 48SMD Tail Brake Reverse (2 Pack)

OVERVIEW

High-output 1156 BA15S P21W LED bulbs designed as a direct replacement for standard incandescent tail, brake, reverse, turn signal and marker bulbs. Each bulb uses 48 x 4014 SMD LEDs to deliver a crisp 6000K white output with low power consumption.

KEY FEATURES

• 1156 BA15S P21W single-contact base, direct replacement
• 48 x 4014 SMD LEDs per bulb, up to 1800 lm output
• 6000K cool white color, 360° beam angle
• Low power, approx. 0.3 A, about 7 W per bulb
• No-polarity, plug-and-play installation
• Built-in CANBUS for anti-flicker, error-free operation (where supported)
• Rated lifespan >50,000 hours, fanless design
• IP67–IP68 waterproof and dustproof construction

TYPICAL APPLICATIONS

Suitable for many 12V vehicles where an 1156 / BA15S / P21W style bulb is required, including:

• Tail lights and brake / stop lights
• Reverse / backup lights
• Turn signal indicators
• Side marker and rear position lights
• Center high mount stop lamps
• Interior and RV/camper cargo or utility lighting

Note: Applications vary by vehicle. They may not fit all bulb positions. Always confirm base type and clearance before purchase.

CROSS-REFERENCE CODES

Standard 1156 BA15S P21W base designed to replace many single-contact bulbs, including (but not limited to):

• 1156, 1156A, 1156NA, P21W, 7506, 7527
• 1073, 1093, 1095, 1129, 1141, 1159, 12088, 1259, 1295, 1295NA
• 1459, 1619, 1651, 1680, 199, 2396, 3496, 3497
• 5007, 5008, 87, 93, 97, 97A, 97NA, 631

Use this list as a guide only. Check your existing bulb markings or owner manual to verify compatibility.

SPECIFICATIONS

• Bulb type: 1156 BA15S P21W single-contact
• LED configuration: 48 x 4014 SMD per bulb
• Luminous flux: up to 1800 lm (pair, approx.)
• Color temperature: 6000K cool white
• Beam pattern: 360°
• Operating voltage: 12–14 V DC
• Power: approx. 7 W per bulb (rated up to 14 W pair)
• Current draw: about 0.3 A per bulb
• Working temperature: -40℃ to +80℃
• Waterproof rating: IP67–IP68
• Fitment type: direct replacement, no polarity
• Estimated lifespan: >50,000 hours
• Housing finish: chrome, polished
• Technology: LED, fanless
• Certifications: CE, RoHS
• Warranty: 2 years (manufacturer terms apply)

INSTALLATION

• Ensure the existing bulb is an 1156 / BA15S / P21W type
• Remove the old bulb from the socket
• Insert the LED bulb straight into the socket
• If it does not light, remove and rotate 180° to align contacts
• Test all functions (brake, reverse, turn, etc.) before reassembling

PACKAGE CONTENTS

• 2 x 1156 BA15S P21W 6000K white 48SMD LED bulbs