Electronic Throttle Body for Ford Escape ZB–ZD 2.3L 2004–2012 (Drive‑by‑Wire)

PRODUCT OVERVIEW

This electronic throttle body is designed for Ford Escape ZB–ZD 2.3L (01/2004–01/2012) vehicles equipped with a drive-by-wire, non-cable throttle system. It precisely controls intake airflow to ensure stable idle, smooth acceleration and reliable engine performance.

KEY FEATURES

• Brand-new electronic throttle body (not remanufactured)
• Drive-by-wire, non-cable type design
• Premium-quality construction for durability and reliability
• Engineered for precise throttle response and stable idle
• Includes 2-year warranty (subject to seller terms)

COMPATIBILITY

Suitable for:

• Ford Escape ZB–ZD 2.3L, approximately 01/2004–01/2012

Always confirm part compatibility with your vehicle using VIN and existing part specifications before purchase.

INSTALLATION NOTES

• Professional installation is strongly recommended.
• Install on the intake manifold using a new seal ring and/or gasket.
• Tighten mounting fasteners evenly in a cross pattern to a torque of approximately 8–10 Nm.
• Ensure all electrical connectors, coolant hoses and vacuum lines are securely refitted.
• Do not use a throttle body that has visible collision or impact damage.

IDLE RELEARN / SELF-ADAPTATION

After replacing or cleaning the throttle body, an idle relearn (throttle adaptation) procedure is required. Refer to the latest vehicle service manual or technical service information for the correct process. General conditions typically include:

• All electrical accessories switched off
• Coolant temperature above approximately 80 °C
• Battery voltage above approximately 11 V
• Transmission in Park (P)
• Accelerator pedal not pressed during basic setting

Some vehicles may allow manual or diagnostic-tool based adaptation. Exact procedures vary by model; follow manufacturer instructions for best results.

SAFETY & HANDLING

• Allow the engine to cool before disconnecting any coolant or vacuum hoses.
• Avoid damaging the intake manifold sealing surface.
• Protect the electrical connector from moisture, dirt and contaminants.
• Check for coolant and vacuum leaks after installation and initial warm-up.

RETURN INFORMATION

For change-of-mind returns, the product should be unused, complete with all accessories and in its original packaging. Restocking fees may apply according to seller policy.