Front Left Electric Window Regulator with Motor 2-Pin for Mitsubishi L300

PRODUCT OVERVIEW

This front left electric window regulator with 2-pin motor is a high-quality aftermarket replacement designed for selected Mitsubishi Express Van and Mitsubishi Starwagon models. Supplied as a complete assembly, it restores smooth and reliable power window operation on the front passenger side.

KEY FEATURES

• Complete electric window regulator with integrated motor
• Front left (front passenger side) position
• 2-pin motor connection
• High-quality aftermarket construction
• Brand new part, supplied as one piece
• 12-month manufacturer warranty (part only)

SPECIFICATIONS

• Product: Window regulator
• Operating mode: Electric
• Placement on vehicle: Front left (front passenger side)
• Motor connection: 2 pins
• Part type: High quality aftermarket
• Condition: Brand new
• MPN / Item No.: 101150
• Warranty: 1 year (part only)
• Quantity supplied: 1 piece

VEHICLE COMPATIBILITY

Use this list as a guide only. Always compare the part number, plug type and images with your original regulator before purchase.

• Mitsubishi Express Van SF 10/1986 - 08/1990
• Mitsubishi Express Van SG 09/1990 - 08/1991
• Mitsubishi Express Van SH 08/1991 - 08/1994
• Mitsubishi Express Van SJ 09/1994 - 2013
• Mitsubishi Starwagon SF 08/1986 - 05/1990
• Mitsubishi Starwagon SG 06/1990 - 06/1991
• Mitsubishi Starwagon SH 09/1991 - 08/1994
• Mitsubishi Starwagon SJ 09/1994 - 09/1999

ANTI-PINCH FUNCTION SETUP (WHERE APPLICABLE)

If the regulator motor is equipped with an anti-pinch (one-touch) function, follow the reset procedure after installation. Do not power the motor before it is installed in the door, otherwise the anti-pinch function may require resetting.

RESET PROCEDURE

• Step 1: Pull the window switch briefly to move the glass slightly up to the top.
• Step 2: Hold the one-touch switch up for 3–5 seconds at the top position.
• Step 3: Press the window switch briefly to move the glass slightly down to the bottom.
• Step 4: Hold the one-touch switch down for 3–5 seconds at the bottom position.
• Step 5: Pull the one-touch switch to raise the window fully and confirm it no longer drops after reaching the top.

If the window still drops after reaching the top, repeat the reset steps until the anti-pinch function is correctly set.

INSTALLATION & NOTES

• Professional installation by a qualified automotive mechanic is strongly recommended.
• Compare all mounting points, connector pins and overall layout to your original part.
• Images are of the actual product; colour or finish may vary slightly due to screen settings and lighting.
• Part supplied is intended as an aftermarket replacement for repair and service use.