Front Right Electric Window Regulator (No Motor) for Fiat 500 2-Door

PRODUCT OVERVIEW

This front right electric window regulator is a high-quality aftermarket replacement for selected Fiat 500 2-door models. Supplied without motor, it is designed as a direct-fit repair solution for a faulty or worn regulator assembly.

KEY FEATURES

• Front right (driver side) door fitment
• Electric window regulator assembly
• Motor not included (reuse existing compatible motor)
• High-quality aftermarket construction
• Brand new part supplied as a single piece
• Backed by a 1-year parts-only warranty

SPECIFICATIONS

• Product type: Window regulator
• Operating mode: Electric
• Placement on vehicle: Front right (driver side)
• Motor: Not included
• OE reference number: 51785413
• MPN / Item no.: 101397
• Condition: Brand new
• Quantity supplied: 1 piece
• Warranty: 1 year (part only)

FITMENT INFORMATION

• Fiat 500 (2-door), 2007–2015

Fitment information is provided as a guide only. Always compare the OE reference number and product images with your original part before purchasing.

ANTI-PINCH FUNCTION RESET (MOTOR NOT INCLUDED)

If used with a window motor that has an anti-pinch function, correct setup of the motor in the door is critical. Do not test the motor before it is mounted in the door, as this can cause the anti-pinch calibration to fail and require resetting.

ANTI-PINCH RESET PROCEDURE

• Step 1: Pull the window switch briefly so the glass moves slightly up to the top position.
• Step 2: Hold the one-touch switch in the up position for 3–5 seconds at the top.
• Step 3: Press the window switch briefly so the glass moves slightly down to the bottom position.
• Step 4: Hold the one-touch switch in the down position for 3–5 seconds at the bottom.
• Step 5: Pull the one-touch switch to move the window fully up to the top.

Reset is successful if the window remains at the top and does not drop down again. If it drops after reaching the top, repeat the reset steps until the function is correctly calibrated.

INSTALLATION & NOTES

• Professional installation by a qualified automotive technician is recommended.
• Intended as a replacement component for repair of an existing window system.
• Colour or finish may appear slightly different on screen due to lighting and display settings.
• Always match the mounting points, connector locations and overall layout to your original regulator.