Front Right Electric Window Regulator (No Motor) for Peugeot 307 9222V9

Product Overview

This front right electric window regulator is a high-quality aftermarket replacement designed for selected Peugeot 307 2-door convertible and hatchback models. It is supplied without motor and matches OE reference number 9222V9.

Key Features

• Application: Peugeot 307 2003–2010 2-door convertible/hatch (where applicable)
• Position: Front right (front driver side)
• Operating mode: Electric
• Motor: Not included (regulator mechanism only)
• OE reference: 9222V9
• MPN/Item No.: 101431A
• Condition: Brand new
• Specification: High-quality aftermarket replacement
• Quantity supplied: 1 piece
• Manufacturer warranty: 1 year (part only)

Fitment Details

• Peugeot 307 2003–2010 2-door convertible/hatch (confirm with OE number 9222V9 and images before purchase)

Always compare the part number and product photos with your original regulator to ensure correct fitment.

Anti-Pinch Motor Reset Note

This regulator is designed to work with compatible electric window motors. If your motor has an anti-pinch (one-touch) function, it may require resetting after installation.

Anti-Pinch Reset Procedure

• Do not test the motor before it is installed in the door, or the anti-pinch function may fail and require reset.
• Install the motor on the regulator and connect it to the one-touch window switch.
• Operate the switch to raise the window fully and check if it stays at the top.
• If the window drops after reaching the top, perform the reset steps below.

• Step 1: Pull the window switch briefly to move the window slightly up to the top position.
• Step 2: Hold the one-touch switch in the up position for 3–5 seconds at the top.
• Step 3: Press the switch briefly to move the window slightly down to the bottom position.
• Step 4: Hold the one-touch switch in the down position for 3–5 seconds at the bottom.
• Step 5: Pull the one-touch switch again to raise the window fully to the top and verify it no longer drops.

If the window still drops after reaching the top, repeat the reset procedure until the function operates correctly.

Important Notes

• For best results and to maintain warranty coverage, installation should be carried out by a qualified automotive technician.
• Colour and finish may appear slightly different on screen due to lighting and display settings.
• This part is intended as a replacement component for repair and maintenance purposes.