Front Right Power Window Regulator with Motor 2-Pin for Ranger PJ/PK & BT-50

Product Overview

This front right electric window regulator with 2-pin motor is a high-quality aftermarket replacement designed for selected Ford Ranger PJ/PK and Mazda BT-50 UN applications. Supplied as a complete assembly, it is ideal for repairing faulty, inoperative, or slow-operating power windows.

Key Features

• Complete power window regulator with pre-fitted electric motor
• Front right (driver side) position
• 2-pin motor electrical connection
• Durable, high-quality aftermarket construction
• Brand new part with 1-year manufacturer warranty (part only)

Specifications

• Product type: Power window regulator assembly
• Operating mode: Electric
• Placement on vehicle: Front right (front driver side)
• Motor connection: 2-pin
• OE reference number: UR5758590A
• MPN/Item No.: 101353
• Condition: Brand new
• Quantity supplied: 1 piece

Vehicle Compatibility

• Ford Ranger PJ 12/2006 – 01/2009
• Ford Ranger PK 01/2009 – 09/2011
• Mazda BT-50 UN 05/2006 – 06/2011

Always compare the OE reference number, plug type, and images with your original component to confirm compatibility before purchase.

Anti-Pinch Function Reset (If Applicable)

If the regulator motor is equipped with an anti-pinch or one-touch function and the window drops after reaching the top, perform the reset procedure below:

• Install the regulator and connect it to the one-touch window switch before testing.
• Step 1: Pull the window switch briefly to move the glass slightly up to the top position.
• Step 2: Hold the switch in the up (one-touch) position for 3–5 seconds.
• Step 3: Press the switch briefly to move the window slightly down to the bottom position.
• Step 4: Hold the switch in the down (one-touch) position for 3–5 seconds.
• Step 5: Pull the one-touch switch to drive the window fully up and confirm it no longer drops.

If the window still drops after reaching the top, repeat the reset procedure.

Installation & Warranty Notes

• Intended for use as a direct replacement/repair part only.
• Installation by a qualified automotive mechanic is strongly recommended to maintain warranty.
• Warranty covers replacement of the defective part only; labour, diagnostics, and associated costs are excluded.
• Tamper-evident seals or labels (where fitted) must not be removed prior to confirming correct operation.

Product images are for reference only and may show minor colour or finish variations due to lighting or screen settings. Always match the bracket design, mounting points, and electrical connector to your original regulator.